In this tutorial, you will find the Huawei nova 7 5G (JEF-AN00, JEF-AN20) testpoint which will be helpful in your future reference to remove the Huawei ID, remove FRP, User Lock, and firmware flashing then follow this article.

Why Do We Need TestPoint?

  • Install the firmware file on Huawei nova 7 5G.
  • You can remove Huawei ID using Test Point
  • Repair IMEI and NVRAM using it
  • Restore or Unbrick dead Huawei nova 7 5G by flashing firmware.
  • Easy to remove FRP lock or screen lock

Where to Find Test Point in Huawei nova 7 5G

  • First, Download and Install Huawei USB Drivers on Windows PC.
  • Remove the back panel of the Huawei nova 7 5G device carefully. Try not to damage hardware parts.
  • Now, check the screenshot below to find out the Huawei nova 7 5G Test Points.

Also Read

Download Google Camera for Huawei Nova 7 5G, 7SE 5G, and 7i | GCam APK

Will Huawei Nova 7 5G, Nova 7SE 5G, and Nova 7i Get Android 12 (HarmonyOS) Update?

How to Remove Huawei ID on Huawei nova 7 5G JEF-AN00, JEF-AN20 FRP Lock

  • Download and install the SigmaKey Software on your computer.
  • Connect your device to PC using a USB Cable in upgrade mode
  • Select the Serial Port as DBA Adaptor Port.
  • Select the Software Testpoint On Off
  • Now load the downloaded firmware package “UPDATE.APP”
  • The software will start the flashing process. Wait for a few seconds or minutes to complete the process on your Huawei nova 7 5G. Do not remove your device.
  • After the process, the device will enter factory mode.
  • Now you can connect your device again by removing and connecting the USB cable again.
  • Now under serial port, make sure you select USB (autodetect)
  • Select Authorize has Huawei
  • Tap on Remove Huawei ID.
  • The process will begin to remove the firmware protection, also called FRP lock.
  • After successfully removing the Huawei ID, you have to set the testpoint OFF. This will again revive the phone from factory mode to normal phone mode.
  • Select the Serial Port as USB (autodetect), Authorize with device model, and then tap the Software Testpoint on/off.
  • After completing the process, your device will be back to normal

That’s it, guys. We hope this guide was helpful to you. For additional queries, you can comment below.